Jd 450 Manual

  1. Jd 450 Crawler Loader
  2. Jd 450 Dozer Parts

(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. Other construction equipment. This technical manual is intended for actual service John Deere 450D crawler bulldozer and 455D crawler loader.

The John Deere 450C is an industrial crawler manufactured by John Deere in Dubuque, Iowa, USA from 1973 to 1982. The John Deere 450C is equipped with a 3.6 L (219.0 cu·in) four-cylinder diesel engine and a partial power shift transmission with 8 forward and 4 reverse gears and dry disc clutch.

The JD 450C industrial crawler used the John Deere engine. It is a 3.6 L, 3,589 cm2, (219.0 cu·in) four-cylinder turbocharged diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.2:1. This engine produced 71 PS (52.2 kW; 70 HP) at 2,500 rpm of output power and 241.4 N·m (24.6 kg·m, 177.9 ft·lb) at 1,300 rpm of torque.

Following attachments are available for the John Deere 450C industrial crawler:

  • Front-mount John Deere 6405: 2280 mm (90.0 in) blade
  • Front-mount John Deere 6410: 2690 mm (106.0 in) blade
  • Front-mount John Deere 6415: 2430 mm (96.0 in) blade

John Deere 450C Specifications

Jd 450 Crawler Loader

General Specifications
ModelJohn Deere 450C
Length
Width
Height2,430 mm (95.7 in)
Wheel base
Weight6,500 kg (14,330 lbs)
Fuel tank capacity117.3 liters (31 US gal.; 25.8 Imp. gal)
Battery12V
Cabin typeFour-post ROPS or Cab (optional)
Engine
Engine modelJohn Deere
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement3.6 L, 3,589 cm2, (219.0 cu·in)
Bore and stroke102.0 mm X 110.0 mm (4.02 in X 4.33 in)
Compression ratio16.2:1
Horsepower71 PS (52.2 kW; 70 HP) at 2,500 rpm
Torque241.4 N·m (24.6 kg·m, 177.9 ft·lb) at 1,300 rpm
StarterElectric
Oil capacity:8.5 L (9 US. qt, 7.5 Imp. qt.)
Coolant capacity:15.1 L (16 US. qt, 13.3 Imp. qt.)
Transmission and chassis
ChassisCrawler
Steering type
Brakes
Transmission model
Transmission typePartial power shift with dry disc clutch
Gears8 forward and 4 reverse
SpeedForward: 10.8 kmh (6.7 mph) Reverse: 10.3 (6.4 mph)
Transmission oil capacity30.3 L (8 US. gal, 6.7 Imp. gal.)
Tracks
Size16-inch tracks
Jd 450 Manual

Jd 450 Dozer Parts

PTO (Power take-off shaft)
Rear PTO type
Rear PTO speed1,000 rpm
Hydraulic system
Hydraulic typeOpen center
Pressure1750 psi (120.7 bar)
Pump flow15.0 gpm (56.8 lpm)
23.0 gpm (87.1 lpm)

Comments are closed.